Table of contents:
Video: New Gripping Tongs Gently Remove Sensitive Injection Molded Parts
The housing and jaws of both grippers are made of anodized, high-strength aluminum alloy. The elastomer HNBR impresses with a high working temperature range from -30 ° C to 160 ° C. In addition, it is elastic, low-impact, wear-resistant, low-abrasion, and free of LABS and silicone. For Fipa, HNBR is therefore the preferred material for the contact surfaces of gripping tongs to remove sensitive plastic parts from injection molds.
Exceptionally soft pads
The new GR04.106 gripper with exceptionally soft pads made of HNBR ensures gentle gripping. Even on very sensitive plastic parts, it leaves no scratches or damage. Worn pads can be replaced in no time at all. The time-consuming installation and removal of the complete pliers is no longer necessary, as is the subsequent test and programming work on the gripper system. The HNBR pads are permanently in stock and can be delivered immediately.
The GR04.100-HNBR gripper is particularly suitable for handling chrome-plated or lacquered plastic parts thanks to jaws with a full HNBR coating. Occasional contact or bumping of the workpieces with the gripper jaws does not scratch sensitive surfaces. A wide jaw opening enables large sprues to be gripped safely. Thanks to gap-free closing, it also grips flat sprues reliably. (jv)
Popular by topic
Injection Molded And 3D Printed Prototypes Made Of LSR
With the protosys business area, BAHSYS is constantly developing new possibilities for the production of prototypes. Now the company has expanded its range of services to include the production of injection molded and 3D printed prototypes from LSR
Uncover Lightweight Construction Potential For Injection Molded Parts
With the K-Tech-Check, P /u00f6ppelmann offers a component assessment that shows possibilities for weight reduction and leads to cost savings
Check Injection Molded Sample Parts Digitally For Dimensional Accuracy
With an optical 3D scanner, Weiss Kunststoffverarbeitung closes the cycle of development and production. Reverse engineering ensures that the manufactured components correspond exactly to the CAD data
Continuous Fiber Reinforced Injection Molded Parts With Integrated Electronics
In the TEMAG research project, scientists from the Institute for Lightweight Construction and Plastic Technology (ILK) at the Technical University of Dresden developed a vehicle tailgate that is injection molded with continuous fiber reinforcement and functional elements
Remove Gently
Art or smear - no matter what you think graffiti: where it was illegally attached, it must be removed. With a
