Table of contents:
Video: Slim Light Grids Provide Protection For The Tightest Spaces
The new Psen Opt Slim light barriers are suitable for space-critical areas on machines with cyclical interventions, such as inlay work or material feed and removal. Thanks to the cascading function without dead zones, they offer effective protection against overlapping and kicking in according to IEC 61496-2.
Increased machine availability
The LED display enables the operator to identify the main causes responsible for the machine stop at a glance. In this way, machine availability can be increased.
Psenopt Slim can be installed quickly and easily with compatible assembly aids. A wide range of accessories such as deflecting mirrors and test bars is also available for Psenopt Slim.
Equipped for all security cases
There are a large number of variants for the various applications: The designer can choose between light grids type 2 and type 4 according to EN / IEC 61496-1 / -2 as well as corresponding variants for finger and hand protection. You can choose between different protective field heights - from 150 mm to 1200 mm.
In connection with, for example, the Pnoz Sigma safety relays or the configurable Pnoz Multi control systems, Psenopt Slim offer the user an economical and complete solution for machine safety. (jv)
Popular by topic
Intelligent Installation Of Light Grids
When a system was retrofitted, an unusually installed security solution enabled the continued operation of two production systems in accordance with the standards: The light grids are located in the floor and on the ceiling
Maximum Protection Through Correct Installation Of Light Grids
Questions arise again and again when properly installing safety light grids. What must be considered when choosing and installing such systems?
Robust IR Light Grids For Presence And Dimension Control
With the new sensor series DGI- (switching) and MGI- (measuring) Contrinex presents compact infrared light curtains as a robust plug-and-play solution. According to Contrinex, non-contact measurement using light grids made of infrared rays offers many advantages such as: B. Fast response times, reliable detection of a wide variety of objects and noise sensitivity to visible ambient light
New Light Grids For Applications Up To PL D
Pilz presents a world first with the first type 3 light grids: as of now, the new light grids Psen-opt II enable applications of the performance level d (PL d) safety category. The new light curtain type thus closes the type gap of the revised version IEC 61496-1. With PSENopt II, it is no longer necessary to switch to type 4 if PL d is required
Intelligent Light Grids For Safe Machines
B & R integrates new types of light grids based on Opensafety in its automation system. This enables completely new security concepts for production
