Logo build-repair.com
Company & market 2023

Display Current Measured Values ​​and Parameters At The Same Time

Table of contents:

Display Current Measured Values ​​and Parameters At The Same Time
Display Current Measured Values ​​and Parameters At The Same Time

Video: Display Current Measured Values ​​and Parameters At The Same Time

Отличия серверных жестких дисков от десктопных
Video: Measuring and Observing Current using Oscilloscope and Shunt Resistor 2023, January
Anonim

In addition to the current pressure value, the 2-line display of the push buttons from SMC can simultaneously display two further parameters: switching point (limit value), hysteresis value, response time, maximum value and minimum value. This makes it easier to uncover problems in the pressure supply.

2-line display for 3 parameters

The digital pressure switches of the ZSE20 (F) / ISE20 series measure the pressure of compressed air and non-corrosive gases. The device series is divided into three nominal pressure ranges:

  • Series ISE20: -0.1 to 1 Mpa
  • ZSE20 series: 0 to -101 kPa
  • ZSE20F series: -100 to 100 kPa

Safety

Intelligent products for machine safety and compliance

Three parameters are displayed in two different colors on two lines. The parameters can be set without interrupting the measurement process. A cross-shaped filter on the pressure connection reduces the risk of malfunctions. A design change was developed for this pressure input area, which protects the sensor against the ingress of foreign bodies.

Response time under 2 ms

With the new pressure switches of the ZSE / ISE series, significantly shorter and at the same time more response times can now be set. Starting with the shortest response time of 1.5 ms through levels 20, 100, 500, 1000 and 2000 up to 5000 ms. (br)

Popular by topic