Table of contents:
Video: Deutsch Connector With Short Design Suitable For Easy Installation
2023 Author: Hannah Pearcy | [email protected]. Last modified: 2023-11-26 11:39
The new 2-pin Deutsch connector (MDC06-2S) from Murrelektronik should convince with its particularly short design - it has a length of around 18 mm when plugged in. This practice-oriented solution makes assembly easy, especially in confined installation situations.
The connector is pre-assembled, cast and 100% electrically tested. It therefore does not have to be connected by hand - this saves time and reduces the risk of incorrect wiring. In addition, no measures are required to protect the individual cores: the abrasion-resistant, UV and oil-resistant PUR sheathed cable is accurately cast. This should ensure particularly high mechanical security. According to the manufacturer, water and dirt cannot reach the individual wires and also cannot penetrate the cable sheath. At the same time, strain relief is provided, which reduces the risk of a later failure due to a cable break.
Intelligent lines with Smartcore technology
Solution for mobile hydraulics and commercial vehicle construction
In addition, a protective hose (corrugated hose) can be attached, a suitable connection is attached to the connector. According to the company's own information, the fully encapsulated Deutsch connector is the ideal solution for mobile hydraulics and commercial vehicle construction.
The Deutsch connector is also available with an integrated function display. A wire cross-section of 0.75 mm² should ensure a low voltage drop for long cables. The wired versions of the plug are suitable for on-board voltage systems with 12 V and 24 V, the unwired up to 230 V. The plug fulfills the requirements according to protection class IP68 / 66K and resists vibration and shock.
The Deutsch connector is available with an open cable end, but also as a connecting cable to Deutsch connector, junior timer, M12 or valve connector. The length can be selected in 30-centimeter increments for short cables (0.2 m to 1.5 m), in 50-centimeter increments for longer cables (up to 100 m) - and this when ordering one cable. (sh)
Up to two thirds shorter and more than half lighter - these are the key data of the new JCM air cylinders from SMC Germany. The development of a new auto switch assembly line not only saves length and weight, but also 8 mm installation height
Icotek's KEL-DPZ cable entry plates can accommodate up to 72 cables in just under 198 mm /u2. They are available in a wide variety of variants and are predestined for the implementation of non-assembled cables
In collaboration with the Technology Institute for Metal & Engineering /u2013 in short Time /u2013, the Westerwald metal specialist AMS has created a new kind of solution to better assemble and securely fasten heavy energy and data cables in the tower of a wind turbine
The new angled connector power M23 from Intercontec should convince with its small construction height, individually adjustable cable outlet direction, 360 /u0b0 shielding and high protection class for the use in harsh environments
Aventics has launched a new sensor series. Under the name ST6, the pneumatic specialists are now selling versatile proximity sensors that can be installed in just a few steps and without special tools