Press-in Threaded Bolts Made Of Stainless Steel Offer Optimal Corrosion Resistance

Penn Engineering's 400 series stainless steel threaded bolts allow mounting, spacing definition or stacking of boards, boards or components. They can be reliably installed by pressing them into pre-punched and appropriately dimensioned round mounting holes in thin load-bearing sheets made of stainless steel. After installation in sheets with a hardness of up to HRB 88 / HB 183, they become a permanent part of an assembly and can neither loosen nor fall out. A suitable mounting screw completes the fastening process.

Available in a variety of designs

This nickel-plated, rust-free product line includes threaded bolts of the type SO4 with a continuous thread, threaded bushes of the type BSO4 with a closed thread (the closed thread of which enables a flush surface on the back of the receiving plate) and threaded bolts of the type TSO4, which are specially designed for installation in particularly thin ones Stainless steel sheets are designed.

The threaded bolts of the types SO4 and BSO4 are available in thread sizes from M3 to M5 and from # 4-40 to # 8-32, and can be installed in stainless steel sheets with a thickness of 1mm / 0.04 “. The threaded bolts of the type TSO4 are available in thread sizes from M2.5 to M3.5 and from # 2-56 to # 6-32, and can be installed in stainless steel sheets with a thickness of 0.63mm / 0.025 “. Detailed specifications and strength values ​​(leaflet SONP), fastener drawings and models are available online at www.pemnet.com. (mz)