Transport The Splice Film Easily - Without Deep-freezing

Splice films expand during curing. This is an advantage wherever uneven surfaces make normal adhesive bonds difficult or impossible. Because the expansion of the adhesive film fills holes and cavities and creates a continuous, stable connection. With the 3M Scotch-Weld splice film AF 3014, 3M is now launching a new splice film that has a particularly long shelf life and should also be very easy to use.

Significantly longer storage stability at room temperature

The transport of splice films in particular was very complex in the past. Because the adhesive films always had to be transported frozen - due to their composition or for safety reasons. The same was true for storage. If the low temperatures could not be maintained permanently, their shelf life was significantly reduced. The 3M Scotch-Weld splice film AF 3014 is now said to be the first splice film that has a much longer shelf life at room temperature.

Easy handling due to less sticky surface

3M mentions yet another advantage of the new film: the surface of the splice film is less sticky. The liner is also easy to remove. This should make the splice film particularly easy to use. In addition, the Scotch-Weld splice film is compatible with curing cycles of 120 ° C and 180 ° C and complies with the REACH guidelines. It is available as sheets or rolls and in several different thicknesses. (sh)