Mucoblast Clean: Biocompatible Mold Removal

The bionic 2-phase mold eliminator Mucoblast Clean from Most Industrieprodukte is designed to quickly remove mold. According to the manufacturer, the product then seals the wall with a breathable, biocompatible layer.

And this is how it is done: Spray the affected wall directly on the discolored moldy areas, such as in the vicinity of the infestation and on all other condensation-damp wall areas with the mold remover. Respiratory protection and protective clothing as well as work gloves should be worn and the room should be well ventilated. In order to achieve an optimal effect, at least 70 grams per square meter should be applied to the wall, in the case of heavy infestation, double the amount per square meter is recommended. In order to determine the correct application quantity, the spray bottle must be weighed before and after application. The product should then take effect for about ten minutes before mold and spores are wiped off with an absorbent cloth. The soiled cloth should immediately be packed in a sealed plastic bag and sealed so that the spores cannot spread. Spray on infected areas again if necessary. Let it dry slightly. Mucoblast Clean is approved as an environmentally compatible hygienizing and disinfectant.

www.most-industrieprodukte.de