Flower Boat

2023 Author: Hannah Pearcy | [email protected]. Last modified: 2023-07-30 18:55

and it is a beautiful sight in our garden kingdom.

There is no blueprint for this, I built it freely. I briefly explain how: A wood was basically planed as a triangle for the tip of the boat. The first layer of profiled wood (12mm thick) is screwed onto both sides of this. I have prepared the stern of the boat according to my size. There is an intermediate wall where the mast can be seen in the picture, which is no longer visible after filling with earth. This intermediate wall is used for the design by screwing the individual layers of the profiled wood together from the bow to the stern around the intermediate wall. This continues with the individual layers of the profiled wood until the height is reached. As a hint, if you put the individual profiles together, be sure to connect them with waterproof glue. Once the hull has reached its shape, simply place it on several planks of planks, mark the inner outline, cut out the bottom of the boat and fit it into the hull. Now only paint with paint, insert the mast, insert film for moisture protection, insert soil and plant. Have fun, it's not that difficult, there are no limits to your creativity. My boat is 2.50m long, 0.60m wide and 0.32 cm high. The size of a boat is up to everyone, but it depends on the length of the profile wood. Plant and plant soil. Have fun, it's not that difficult, there are no limits to your creativity. My boat is 2.50m long, 0.60m wide and 0.32 cm high. The size of a boat is up to everyone, but it depends on the length of the profile wood. Plant and plant soil. Have fun, it's not that difficult, there are no limits to your creativity. My boat is 2.50m long, 0.60m wide and 0.32 cm high. The size of a boat is up to everyone, but it depends on the length of the profile wood.