Living Without Electrosmog

2023 Author: Hannah Pearcy | [email protected]. Last modified: 2023-08-25 03:36

TV, PC, cordless phone and cell phone have become an integral part of our lives. At the same time, the discussion about the health hazard posed by electro-smog is becoming increasingly intense. A new tissue is supposed to shield the radiation. Dr. Günter Glock, BaumitBayosan Not only our apartments and houses are full of technical devices, our cityscape is also increasingly shaped by mobile phone antennas and transmission masts. It is controversial whether the electromagnetic waves emanating from these sources endanger health. Dr. Gerd Oberfeld, Head of the Medical Directorate of the State of Salzburg, sees electrosmog as a "stress factor that can cause sleep and concentration disorders as well as headache, limb and nerve pain". There is also suspicion that tumor diseases are being promoted. However, there are just as few reliable studies that prove a concrete health hazard as there are studies that prove the harmlessness of electromagnetic waves. The Association of Building Biology and the Federal Association of German Building Biologists found in tens of thousands of professionally conducted living space investigations that strong electromagnetic pollution was found in more than 99 percent of the measuring stations. Since technical fields and waves elude our sensory perception, they do not exist for us, which rather encourages the careless handling of technical equipment and devices. Radiation in the house The most effective measures against electrosmog in new buildings are the use of completely shielded and halogen-free electrical cables - this should always be an absolute must in timber construction - as well as the installation of mains isolators for the sleeping areas in existing buildings. It goes without saying that radio alarm clocks, low-voltage halogen lamps, electric blankets and loudspeakers are not used in the immediate vicinity of the bed. The refusal to use their own wireless transmission systems, such as cordless telephones, which have become the strongest high-frequency sources in German homes, almost goes without saying if you are interested in a healthy living environment and a place for regeneration within your own four walls. Using the cell phone as an alarm clock should also be a thing of the past. Battery-operated radio alarm clocks (only receivers, no transmitters!) Perform the same function. Radiation from outside But how can you protect yourself from the radiation, which is getting stronger and penetrates from outside? Even massive walls are no longer a protection here. The higher the thermal insulation of a brick, the more permeable it is to high-frequency radiation. A heat protection glass in the window area, as it is now standard equipment in house construction, shields the radiation better by a factor of 100. For the largest areas of the house, exterior walls and roof, the health-conscious client can use shielding systems that have been tested for their shielding effectiveness by accredited test laboratories under practical conditions. With the increasing use of ether as an interface for wireless communication, the shielding of electromagnetic waves from buildings and apartments will become a standard module of its range of services for health-conscious architects in the next few years. Shielding fabrics For shielding low-frequency, electrical fields and high-frequency electromagnetic waves with a shielding effect of up to 60 dB, fine-meshed, highly effective copper mesh is used. According to the manufacturer, they have the following properties:Electric fields and high-frequency electromagnetic waves with a shielding effect of up to 60 dB, for example, fine-meshed, highly effective copper mesh are used. According to the manufacturer, they have the following properties:Electric fields and high-frequency electromagnetic waves with a shielding effect of up to 60 dB, for example, fine-meshed, highly effective copper mesh are used. According to the manufacturer, they have the following properties:

• high electrical conductivity
• open to diffusion, tear-resistant and flexible
• no chemical fumes
• no changes in the earth's magnetic field
• very high shielding properties
• Material stability over at least 20 years
• simple and inexpensive processing
• Fire protection class A1

The areas of application are in private and commercial residential construction, with full thermal insulation systems, timber or timber frame construction and dry lining, roof construction and exterior wall areas, embedding in leveling compounds on both interior and exterior walls. All wall, ceiling, floor and roof surfaces in solid or wooden frame construction can be shielded against electrosmog with the fabrics. Processing The surface must be stable, dry, clean, frost-free and free from adhesion-reducing residues and efflorescence. Depending on the condition of the surface, a primer is necessary. A layer of mineral, high-quality special filler is applied to the substrate and leveled with a lath. The first web of tissue is embedded in it. The next sheet is hung with the fold in the already worked sheet. The material is then stapled at a distance of five centimeters using material of the same conductance value (copper clips) before it is smoothed out in the spatula bed and completely covered with a leveling compound. Finally, the conductors are connected to each other with the same conductance values and the system is grounded with an associated EMC earthing set. With seal of approval Before the shielding measure, a professional measurement should always be carried out and a shielding concept created. A control measurement shows the success of the completed shielding measure and can be certified with the seal of approval "Das elektrosmogfrei Haus eV". The new shielding system is available under the name "Home Protect" from BaumitBayosan. Further information: BaumitBayosan Tel.: (08324) 921-0 / Fax: -470 www.baumitbayosan.comcomcomcomcomcomcombefore smoothing them out in the spatula bed and covering them completely with filler. Finally, the conductors are connected to each other with the same conductance values and the system is grounded with an associated EMC earthing set. With seal of approval Before the shielding measure, a professional measurement should always be carried out and a shielding concept created. A control measurement shows the success of the completed shielding measure and can be certified with the seal of approval "Das elektrosmogfrei Haus eV". The new shielding system is available under the name "Home Protect" from BaumitBayosan. Further information: BaumitBayosan Tel.: (08324) 921-0 / Fax: -470 www.baumitbayosan.combefore smoothing them out in the spatula bed and covering them completely with filler. Finally, the conductors are connected to each other with the same conductance values and the system is grounded with an associated EMC earthing set. With seal of approval Before the shielding measure, a professional measurement should always be carried out and a shielding concept created. A control measurement shows the success of the completed shielding measure and can be certified with the seal of approval "Das elektrosmogfrei Haus eV". The new shielding system is available under the name "Home Protect" from BaumitBayosan. Further information: BaumitBayosan Tel.: (08324) 921-0 / Fax: -470 www.baumitbayosan.comFinally, the conductors are connected to each other with the same conductance values and the system is grounded with an associated EMC earthing set. With seal of approval Before the shielding measure, a professional measurement should always be carried out and a shielding concept created. A control measurement shows the success of the completed shielding measure and can be certified with the seal of approval "Das elektrosmogfrei Haus eV". The new shielding system is available under the name "Home Protect" from BaumitBayosan. Further information: BaumitBayosan Tel.: (08324) 921-0 / Fax: -470 www.baumitbayosan.comFinally, the conductors are connected to each other with the same conductance values and the system is grounded with an associated EMC earthing set. With seal of approval Before the shielding measure, a professional measurement should always be carried out and a shielding concept created. A control measurement shows the success of the completed shielding measure and can be certified with the seal of approval "Das elektrosmogfrei Haus eV". The new shielding system is available under the name "Home Protect" from BaumitBayosan. Further information: BaumitBayosan Tel.: (08324) 921-0 / Fax: -470 www.baumitbayosan.comWith seal of approval Before the shielding measure, a professional measurement should always be carried out and a shielding concept created. A control measurement shows the success of the completed shielding measure and can be certified with the seal of approval "Das elektrosmogfrei Haus eV". The new shielding system is available under the name "Home Protect" from BaumitBayosan. Further information: BaumitBayosan Tel.: (08324) 921-0 / Fax: -470 www.baumitbayosan.comWith seal of approval Before the shielding measure, a professional measurement should always be carried out and a shielding concept created. A control measurement shows the success of the completed shielding measure and can be certified with the seal of approval "Das elektrosmogfrei Haus eV". The new shielding system is available under the name "Home Protect" from BaumitBayosan. Further information: BaumitBayosan Tel.: (08324) 921-0 / Fax: -470 www.baumitbayosan.com

A layer of mineral, high-quality special filler is applied to the substrate and leveled out. The first track is embedded in it.

The next sheet is hung with the prefabricated fold in the already filled in fabric sheet and brought into the correct position.

The webs are stapled at a distance of five centimeters using copper clips. The fabric is then completely filled. Finally, the connection for equipotential bonding is made. A corresponding EMC earthing set is included in the scope of delivery.

How it is done The special feature of the processing of the shielding fabric is the lap seam. A patent is pending for this technology.

Electrosmog exposure

• Government services, television and radio frequencies are digitized (pulsed)
• Radar transmitters with ranges of dozens of kilometers broadcast around the clock
• Homes and offices are increasingly being equipped with wireless radio systems
• Shielded electrical installations are still not a mandatory standard