Avoid Errors In The Drive Design

2023 Author : Hannah Pearcy | [email protected] . Last modified: 2023-05-24 11:12

Even if an electric drive has been correctly dimensioned according to the data on which it is based, problems can arise in later operation under unfavorable circumstances. In extreme cases, components have to be replaced and existing designs changed.

In order to avoid such problems, one must know the various causes that lead to these errors. If you are aware of them, the resulting problems can at best be avoided in advance.

When designing a drive, errors can occur if:

• the process is not adequately described,
• incorrect assumptions are made due to too many unknown sizes,
• Boundary conditions are not known,
• Reserve surcharges are set too high or too low,
• States deviating from normal operation are not taken into account,
• there is insufficient knowledge of the behavior of the components and their interactions.

The key data:

User meeting mechatronic drive technology

Date: September 29, 2020

Time: 8:45 a.m. to 6:00 p.m.

Location: Vogel Convention Center, Würzburg

To the program

Sharpen understanding of the drive design

At the user meeting on mechatronic drive technology, Reinhard Mansius highlighted typical errors in his lecture “Safely to the goal: avoiding errors in the drive design”, which can be caused both in advance and in the drive design itself. He is the author of the practical manual for drive design, in which the basics, tools and examples for the design of electrical drive systems are shown.

Secure early bird discount

You can register for the mechatronic drive technology user meeting until July 31, 2020 at the early bird price of EUR 350 per person. The event will take place on September 29, 2020 in Würzburg from around 8:45 a.m. to 6:00 p.m.

Click here to register

At the user meeting, Mansius focuses on avoiding errors in drive design. In his lecture he gives practical help and tips on how problems can be avoided in later operation. In addition, he sharpens the understanding of the drive design and gives the project planning a solid and necessary basis so that it is possible to collect the required output variables from the application, to process them physically and to use them as input variables for the further calculations.

User meeting mechatronic drive technology

Your way to an efficient powertrain

The user meeting for mechatronic drive technology will take place on September 29, 2020 in Würzburg . You can find the entire program here.

The business sponsor of the user meeting is R + W Antriebselemente GmbH, with whose experts you can discuss at the accompanying exhibition. Other exhibitors are: Mayr power transmission, Jakob power transmission, MDesign, Wölfel and Kendrion.

Book tip

The book Drive Design Practical Guide helps you select the essential components of electrical drive systems: motor, gearbox, actuator, power supply and their additional components. The calculation is also dealt with intensively.