Occupational Safety

2023 Author : Hannah Pearcy | [email protected] . Last modified: 2023-06-01 01:49

Security in the workshop ? Sounds hackneyed. A lot is known to do-it-yourselfers. But accidents happen anyway. According to the Institute for Leisure Economics, an accident occurs at home and in leisure time in Germany every six seconds. Do-it-yourselfers and hobbyists are particularly often exposed to the risk of accidents, with occupational safety being comparatively easy to manufacture and integrating into daily DIY.

You work with pointed objects, sharp tools or hazardous substances. In addition, they are often inexperienced in the use of power tools or only have a certain command of certain working techniques. Of course, professionals also happen to have accidents in the workshop. In order to show do-it-yourselfers the most common accident hazards in the workshop and to give tips on how to prevent injuries or worse, we have prepared this topic for you.

Health and safety and rules

Injuries in the workshop can have many causes. Wrong work clothes and a lack of safety protection are just two of them. So safety shoes z. B. no workshop is missing. The metal or plastic caps worked into the shoe usually protect against falling objects. Sandals or the good old slippers only protect your socks from dirt. Hearing protection and safety glasses are also preferred. Some DIY enthusiasts also wear a smock in the workshop. However, this is not close enough to the body, which can lead to the smock restricting freedom of movement or drills or saw blades getting caught in it - all not in the sense of higher occupational safety. In addition, always ensure that the work surface is adequately illuminated. This not only increases the accuracy when working, but also serves to protect against accidents. No matter which tool is used, you have to be able to see exactly where and where you are sawing, drilling or cutting.

Renovate

occupational safety on power tools

When doing DIY with power tools, you can get injured quickly and seriously

The time factor also plays a major role in DIY accidents. Often something should be done "just quickly". Security measures are then often disregarded. The work is concentrated and hectic - the risk of accidents increases. Hence the urgent advice: take enough time for every little project. Tiring and prolonged work should be regularly interrupted by breaks. The fact that no alcohol should be drunk in it is self-explanatory. Alcohol leads to poor responsiveness, makes you tired and has nothing to do other than cleaning in the workshop.

Workshop equipment

First aid: workshop first aid kit

A first aid kit is as much a part of the workshop as the toolbox: it belongs in there

Classic risk: the carpet knife

If the handyman thinks of a cutter or carpet knife, in addition to the sharpness of this tool, he almost automatically also thinks of the pain that the knife can cause if used improperly. Cut wounds occur when the knife is pulled with too much tensile force through a material that is too soft. The blade leaves the cut surface and often ends up in the finger or when cutting carpets in the knee or thigh of the user. To work more comfortably, the knife is pulled towards the body. It would be safer to kneel or sit at a 90 ° angle to the cutting line. This is how you pull the knife past your body. When cutting carpets, be sure to use a sturdy carpet knife without a snap-off blade.

The topic of order also plays an important role in the prevention of accidents. Pointed and sharp tools should be stowed in the tool box in such a way that you cannot accidentally reach into a blade or saw blade when reaching into the tool box. The floor of the workshop should be free from trip hazards. Therefore: tools belong on the workbench and waste in the trash. Please lay power cables and multiple sockets so that they do not become obstacles.

Finally, a trick to safely sink short nails. Even the most experienced handyman has already hit the finger with this hammer. To avoid bruising your thumb and index finger in the future, hold the nail with a small piece of paper. To do this, prick the nail through one end of the paper and hold it at the other end of the paper sufficiently far from the impact surface of the hammer.

Source: himself is the man